Research Article
Investigation of Rheological Behavior of Low Pressure Injection Molded Stainless Steel Feedstocks
Table 1
Components used for preparation of various feedstocks.
| Formulations | Powder (vol.%) | Binder | PP (vol.%) | PW (vol.%) | SA (vol.%) |
| PGA-63 | 63 | 11.1 | 24.05 | 1.85 | PGA-66 | 66 | 10.2 | 22.1 | 1.7 | PGA-69 | 69 | 9.3 | 20.15 | 1.55 | PGA-72 | 72 | 8.4 | 18.2 | 1.4 | P25/75-61 | 61 | 9.75 | 27.3 | 1.95 | P25/75-64 | 64 | 9 | 25.2 | 1.8 | P25/75-67 | 67 | 8.25 | 23.1 | 1.65 | P25/75-70 | 70 | 7.5 | 21 | 1.5 | PWA-0B | 65 + (0 wt.% B) | 8.75 | 24.5 | 1.75 | PWA-0.5B | 63.86 PWA + 1.13 B (0.5 wt.% B) | 8.75 | 24.5 | 1.75 | PWA-1B | 62.76 PWA + 2.23 B (1 wt.% B) | 8.75 | 24.5 | 1.75 | PWA-1.5B | 61.69 PWA + 3.31 B (1.5 wt.% B) | 8.75 | 24.5 | 1.75 |
|
|