Research Article
Influence of Control Parameters during Drilling of Aluminum Reinforced with HNT Hybrid Matrix Composites
Table 3
Control parameters and corresponding levels.
| S. no | Factors | Unit | Values | I | II | III |
| 1 | Weight percentage of HNT | % | 3 | 5 | 7 | 2 | Weight percentage of BN | % | 2 | 3 | 4 | 3 | Spindle speed | rpm | 500 | 1000 | 1500 | 4 | Feed rate | mm/min | 20 | 40 | 60 |
|
|