Parameters Optimization of Multipass Milling Process by an Effective Modified Particle Swarm Optimization Algorithm

Table 3

Computational results of PSO and ABC.

Method		Results of IPSO				Results of ABC				(min)
S. no.	Machining strategy	(mm/tooth)	(m/min)	(min)	Production time	(mm/tooth)	(m/min)	(min)	Production time
1		0.242	53.53	0.456	3.24	0.231	48.117	0.475	3.278	1.9
		0.242	53.53	0.456		0.231	48.117	0.475
		0.190	72.61	0.428		0.189	74.090	0.428
2		0.341	50.86	0.340	3.232	0.337	46.982	0.343	3.240	2.0
		0.341	50.86	0.340		0.337	46.982	0.343
		0.341	50.86	0.340		0.337	46.982	0.343
		0.435	64.19	0.212		0.432	64.41	0.211
3		0.242	53.53	0.456	3.334	0.231	48.117	0.475	3.355	2.0
		0.554	47.33	0.225		0.552	47.519	0.226
		0.554	47.33	0.225		0.552	47.519	0.226
		0.190	72.61	0.428		0.189	74.090	0.428
4		0.554	47.33	0.225	3.428	0.552	47.519	0.226	3.432	2.1
		0.554	47.33	0.225		0.552	47.519	0.226
		0.554	47.33	0.225		0.552	47.519	0.226
		0.554	47.33	0.225		0.552	47.519	0.226
		0.190	72.61	0.428		0.189	74.090	0.428