Volume 10 [50 articles]
All | 1-10 | 11-20 | 21-30 | 31-40 | 41-50
- Pumping Speed Measurement and Analysis for the Turbo Booster Pump, R. Y. Jou, S. C. Tzeng, and J. H. Liou
Volume 10 (2004), Issue 1, Pages 1-13 - Numerical and Experimental Investigations of the Cavitating Behavior of an Inducer, F. Bakir, R. Rey, A. G. Gerber, T. Belamri, and B. Hutchinson
Volume 10 (2004), Issue 1, Pages 15-25 - Predictive Failure of Cylindrical Coatings Using Weibull Analysis, Brian L. Vlcek, Robert C. Hendricks, and Erwin V. Zaretsky
Volume 10 (2004), Issue 1, Pages 27-31 - Aerodynamic and Performance Behavior of a Three-Stage High Efficiency Turbine at Design and Off-Design Operating Points, M. T. Schobeiri, J. L. Gilarranz, and E. S. Johansen
Volume 10 (2004), Issue 1, Pages 33-44 - Multi-Control-Volume Analysis of the Compression Process in a High-Temperature Root's Type Compressor, David I. Blekhman, Joseph C. Mollendorf, James D. Felske, and John A. Lordi
Volume 10 (2004), Issue 1, Pages 45-53 - Measurements of Strain on 310 mm Torque Converter Turbine Blades, P. O. Sweger, C. L. Anderson, and J. R. Blough
Volume 10 (2004), Issue 1, Pages 55-63 - Improvement of the Turbine Main Stop Valves with Flow Simulation in Erosion by Solid Particle Impact CFD, Z. Mazur, G. Urquiza, and R. Campos
Volume 10 (2004), Issue 1, Pages 65-73 - Inverse Design of Centrifugal Compressor Stages Using a Meanline Approach, Yuri Biba and Peter Menegay
Volume 10 (2004), Issue 1, Pages 75-84 - General Influence Coefficient Algorithm in Balancing of Rotating Machinery, Xiaoping Yu
Volume 10 (2004), Issue 2, Pages 85-90 - Parametric Study of Greitzer's Instability Flow Model Through Compressor System Using the Taguchi Method, Eddie Yin-Kwee Ng, Ningyu Liu, and Shin Yi Tan
Volume 10 (2004), Issue 2, Pages 91-97