Fabrication of Friction Stir Processed Al-Ni Particulate Composite and Its Impression Creep Behaviour
Table 1
Material and processing parameters used for calculation of total power, effective energy, and maximum temperature generated within the processed zone of friction stirred sample.
Sl. number
Parameter
Value
1
Shoulder radius (m)
5.00E − 03
2
Pin radius (m)
1.50E − 03
3
Pin height, (m)
3.00E − 03
4
Co-efficient of friction,
0.45
5
Tool translational velocity, (m/s)
3.00E − 04
6
Scale factor
1
7
Effective strain,
6
8
Strength coefficient,
690
9
Strain hardening exponent,
0.16
10
Effective stress,
919.08
11
Thickness of the work piece, (m)
6.00E − 03
12
Solidus temperature, (K)
933
13
Compressive force, (kN)
8
14
Tool rotational speed, (rpm)
800
15
Energy generated due to plastic deformation, (N)
4.96E − 02
16
Torque due to friction, (Nm)
13.94
17
Energy generated per unit length of the weld, (kN)
