Journal of Nanotechnology
 Journal metrics
See full report
Acceptance rate17%
Submission to final decision79 days
Acceptance to publication19 days
CiteScore6.800
Journal Citation Indicator0.410
Impact Factor4.2

New Insights on Biosynthesis of Nanoparticles Using Plants Emphasizing the Use of Alfalfa (Medicago sativa L.)

Read the full article

 Journal profile

Journal of Nanotechnology publishes papers related to the science and technology of nanosized and nanostructured materials, with emphasis on their design, characterization, functionality, and preparation for implementation in systems and devices.

 Editor spotlight

Journal of Nanotechnology maintains an Editorial Board of practicing researchers from around the world, to ensure manuscripts are handled by editors who are experts in the field of study.

 Special Issues

We currently have a number of Special Issues open for submission. Special Issues highlight emerging areas of research within a field, or provide a venue for a deeper investigation into an existing research area.

Latest Articles

More articles
Research Article

Tunable High-Frequency Acoustoelectric Current Oscillations in Fluorine-Doped Single-Walled Carbon Nanotubes

Herein, we report on a fluorine-doped single-walled carbon nanotube (FSWCNT) phenomenon, that yields tunable high-frequency self-sustained acoustoelectric direct current (ADC) oscillations. A tractable analytical method was used in the hypersound domain, to base the calculations on carriers in the lowest miniband. Hypothetically, the energy of interaction between the carriers and the acoustic phonons is less than the energy of the typical carriers. High-order harmonics of the acoustic phonons’ effective field could be disregarded under this supposition. The ADC was observed to exhibit a nonlinearity, that resulted from the carrier distribution function’s distortion as a result of interaction with the acoustic phonons, which had strong nonlinear effects. Theoretically, we demonstrated that the dynamics of space charge instabilities, due to Bragg reflection of Bloch oscillating carriers in the FSWCNT’s miniband, were the only factors which contributed to the creation of radiation in the terahertz (THz) frequency range. The study also investigated the influence of various FSWCNT parameters such as the overlapping integrals ( and ), ac-field , and carrier concentration on the behaviour of the ADC. The results showed that the intensity of the ADC oscillation could be tuned by adjusting , , , and .This tunability suggests that FSWCNTs could be used as an active device operating at very high frequencies, potentially reaching the submillimeter wavelength range. The study also suggests the possibility of domain suppression and acoustic Bloch gain through dynamic ADC stabilisation.

Research Article

Synthesis, Characterization, and Photocatalytic Performance of ZnFe2O4-g-C3N4 Composites for Tetracycline Removal from Contaminated Water

The presence of emerging contaminants in wastewater like tetracycline poses a significant challenge in water reuse worldwide. The implementation of a p-n heterojunction and dye-sensitized techniques in the enhancement of graphite carbon nitride provides a promising alternative for visible light-driven degradation of emerging contaminants present in wastewater. The present study investigated dye-sensitized and plain composites in degrading tetracycline using natural sunlight in a parabolic trough reactor. The study synthesized four composites of ZnFe2O4-g-C3N4 at 5, 15, and 25 wt% loading of the ferrite by direct annealing of melamine, followed by thermal and ultrasonic exfoliation of bulk graphite carbon nitride and in situ precipitation with zinc ferrites to yield a composite photocatalyst. The photocatalysts were characterized using X-ray diffraction (XRD) analyses which confirmed that all the spinel ferrite phases of ZnFe2O4 were well bonded with g-C3N4 nanosheets to form a composite. The crystallite sizes were calculated by the Debye–Scherrer equation indicating crystal sizes of between 4.63 and 8.61 nm confirming the nanostructures. The scanning electron microscope-energy dispersive spectroscopy (SEM-EDX) tests verified that the spherical globules of ZnFe2O4 were well attached to the mesoporous layers of g-C3N4 and absence of contaminant phases. The UV-Vis analysis for 25% ZF-GCN revealed a band gap reduction from 2.67 eV to 2.03 eV. The PL intensity for all the composites decreased at excitation of 266 nm and 550 nm which was evidence for suppressed charge recombination. A 25% ferrite loading resulted in the best photocatalytic performance with tetracycline degradation of 93.64% and total organic carbon (TOC) removal of 51.89%. The sensitization of the 25% ZF-GCN composite with Eosin Y further improved its performance for degradation of tetracycline to 94.62% and TOC removal to 68.29%. Therefore, dye sensitization is an efficient way of improving the photocatalytic activity of a multicomponent photocatalyst for the removal of emerging pollutants.

Research Article

Enhancement of Optical Properties and Stability in CsPbBr3 Using CQD and TOP Doping for Solar Cell Applications

Cesium lead bromide (CsPbBr3) nanocrystals exhibit remarkable optoelectronic properties and exceptional stability. As a result, they have garnered significant interest for their potential applications in various fields, including solar cells, light-emitting devices, photodetectors, and lasers. Despite its resistance to moisture, oxygen, and heat compared to other perovskite materials, CsPbBr3 still faces challenges maintaining its structural and optical stability over extended periods. This study proposes a robust solution to enhance and improve simultaneously the photoluminescence intensity and stability of CsPbBr3 nanocrystals. The solution involves doping the perovskite precursor with green-synthesized carbon quantum dots (CQDs) and tri-n-octyl phosphine (TOP). The results indicate that the photoluminescence intensity of the perovskite nanocrystals (NCs) is sensitive to varying CQD ratios. A high photoluminescence intensity enhancement of 45% was achieved at the optimal CQDs ratio. The synthesized perovskite NCs/CQDs also demonstrated improved stability by adding TOP into the mixture. After storage in the air for 45 days, the mixed perovskite NCs maintained their performance, which was almost unchanged. Solar cell devices based on the modified perovskite NCs showed a power conversion of 7.74%. The devices also demonstrated a significant open-circuit voltage (VOC), with the most successful device achieving a VOC of 1.193 V, an Isc of 10.5748 mA cm−2, and a fill factor (FF) of 61%. This study introduces a cost-effective method for producing high-quality all-inorganic optoelectronic devices with enhanced performance and stability.

Research Article

Boosting LiMn2O4 Diffusion Coefficients and Stability via Fe/Mg Doping and MWCNT Synergistically Modulating Microstructure

The dissolution of manganese and its deposition on the anode surface cause poor cycling stability in lithium-ion batteries. To alleviate these issues, this study probes the electrochemical activity of highly crystalline and cation-adjusted lithium manganese oxide (LMO) carbon spinel composite obtained via a modified sol-gel synthesis procedure. The pristine LMO cathode was functionalized with a Fe and Mg alloy and fused with purified multiwalled carbon nanotubes (MWCNTs) to form a catalytically stabilized LiMn1.98Fe0.01Mg0.01O4/MWCNT (LMO-FeMg/MWCNT) framework. High-resolution SEM analysis showed well-dispersed particles in the nanometer size range. The electrochemical characteristics of the novel composite materials yielded favourable electrochemical results with diffusion coefficients of 1.91 × 10−9 cm2·s−1 and 5.83 × 10−10 cm2·s−1 for LMO-FeMg and LMO-FeMg/MWCNT, respectively. This improvement was supported by impedance studies which showed a considerable reduction of 0.27 Ω and 0.71 Ω. The cation stabilized system outperformed the pristine LMO material with specific capacities around 145 mAh·g−1, due to an enhancement in electrochemical activity and structural stability.

Review Article

Phytosynthesized Nanoparticles as Novel Antifungal Agent for Sustainable Agriculture: A Mechanistic Approach, Current Advances, and Future Directions

Due to rapidly changing environmental conditions, virulent pathogens have arisen continuously that invades the crops and badly affects their yield and quality of the cash crops which results in economic losses. To overcome the prevalent infection of fungal pathogens, there is an utmost need to develop alternative techniques that avoid conventional agriculture practices. The use of various chemical fungicides is not an environmentally sustainable solution to fungal diseases because it produces environmental contamination and is dangerous for human health. Nanotechnology provides solutions to disease control issues in a significant way. The scientific and industrial systems are being changed by this development. Similarly, nano-based instruments are highly promising in the agriculture sector, particularly for the production of powerful formulations that require appropriate distribution of agrochemicals, nutrients, pesticides/insecticides, and even growth regulators for improved efficiency of use. Nanotechnology provides an inexpensive, environmentally friendly, and alternative effective monitoring of agricultural fungal pathogens. Green nanotechnology is an innovative methodology that revolutionized the field of agriculture to solve these problems. Despite increasing plant growth, nanoparticles meet the agriculture demand for high yield. This study mainly focuses on the promise of various methods for the treatment of fungal diseases through nanoparticles.

Research Article

Reduction of SO2 to Elemental Sulfur in Flue Gas Using Copper-Alumina Catalysts

This study aims to propose an advanced catalyst for the selective catalytic reduction of SO2, as a sustainable process to mitigate the emission of this toxic gas, which is a significant environmental concern. The conversion of SO2 through catalytic reduction with CH4 to elemental sulfur was investigated using Al2O3-Cu catalysts. The reaction was conducted under atmospheric pressure and at a temperature range of 550–800°C. A remarkable 99.9% SO2 conversion rate and 99.5% sulfur selectivity were achieved using the Al2O3-Cu (10%) catalyst at 750°C. The highest conversion rates of SO2 to elemental sulfur, with minimal production of undesirable by-products such as H2S and COS, were obtained when the SO2/CH4 molar feed ratio was set at 2, which is the stoichiometric ratio. Furthermore, the optimal catalyst exhibited excellent long-term stability for SO2 reduction with methane.

Journal of Nanotechnology
 Journal metrics
See full report
Acceptance rate17%
Submission to final decision79 days
Acceptance to publication19 days
CiteScore6.800
Journal Citation Indicator0.410
Impact Factor4.2
 Submit Check your manuscript for errors before submitting

Article of the Year Award: Impactful research contributions of 2022, as selected by our Chief Editors. Discover the winning articles.